Esp Me3 Controller. Rain Bird ESPME3 Wifi Irrigation Controller Special Features (Advanced The ESP-ME3 controller can be upgraded to a SMART controller with EPA WaterSense certification by adding the LNK WiFi module and a WR2 rain sensor A flow sensor can also be added for water monitoring and protection from a broken irrigation system
Rain Bird ESPME3 Controller (422 Module) Wifi Ready from Reece from www.reece.com.au
Add station modules when expanding irrigation without removing or even powering down the controller Upgrade the ESP-ME3 to a SMART controller by adding the LNK WiFi module and a WR2 rain sensor
Rain Bird ESPME3 Controller (422 Module) Wifi Ready from Reece
Configuring a Flow Sensor for Use With ESP-ME3 Controllers The base models have a 4 station capability that is expandable up to 22 stations when the station expansion modules are installed For even greater water monitoring and protection from a broken irrigation system install an optional flow sensor.
Rain Bird ESPME3 WiFi Modular Controller. b To avoid the possibility of damage to the pump, connect a short jumper wire from any unused 5 ESP-ME3 Controller EN Connect Pump Start Relay (optional) a Connect a wire from the PSR (pump start relay) to the MV (master valve) terminal on the Base Module.Then connect another wire from the pump start relay to the field common wire, as shown
Rain Bird Esp Me3 Owner's Manual. Upgrade the ESP-ME3 to a SMART controller with EPA WaterSense certification by adding the LNK WiFi module and a WR2 rain sensor The LNK makes programming and monitoring easy through the enhanced Rain Bird app